Ht60 on stock big cam 3507/17/2023 ![]() ![]() ![]() Slow idle speeds may result in severe cam and lifter wear. Do not allow the engine to run under 2000 rpm for the first 1/2 hour. Coat cam lobes and bottoms of each lifter with MoS2 lube (supplied) to prevent cam lobe and lifter wear from occurring during initial start-up. ![]() Oil/additive must contain Zinc designed for use with flat tappet camshafts. In order for this Performer-Plus cam and lifter kit to be covered under ANY WARRANTY you must use either the correct Edelbrock Sure Seat valve springs or the stock original equipment valve springs.
0 Comments
Leave a Reply. |